Form Approved
REPORT DOCUMENTATION PAGE
OMB No. 0704-0188
The public reporting burden for this collection of information is estimated to average 1 hour per response, including the time for reviewing instructions, searching existing data sources,
gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection
of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for information on Operations and Reports (0704-
0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to
any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number.
PLEASE DO NOT RETURN YOUR FORM TO THE ABOVE ADDRESS.
1. REPORT DATE (DD-MM-YYYY)
3. DATES COVERED (From - To)
2. REPORT TYPE
18-12-2014
Final
4. TITLE AND SUBTITLE
5a. CONTRACT NUMBER
Joint Ordnance Test Procedure (JOTP)-050
Safety Design Requirements for Active Hazard Mitigation Device (AHMD)
5b. GRANT NUMBER
Employed to Address Fast and Slow Cook-off Thermal Threats
5c. PROGRAM ELEMENT NUMBER
6. AUTHORS
5d. PROJECT NUMBER
5e. TASK NUMBER
5f. WORK UNIT NUMBER
8. PERFORMING ORGANIZATION
7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES)
REPORT NUMBER
DOD Fuze Engineering Standardization Working Group
JOTP-050
U.S. Army Armament Research, Development, and Engineering Center
ATTN: RDAR-EIZ / Building 6
Picatinny Arsenal, NJ 07806-5000
10. SPONSOR/MONITOR'S
9. SPONSORING/MONITORING AGENCY NAME(S) AND ADDRESS(ES)
ACRONYM(S)
Range Infrastructure Division (CSTE-TM)
US Army Test and Evaluation Command
2202 Aberdeen Boulevard
11. SPONSOR/MONITOR'S REPORT
NUMBER(S)
Aberdeen Proving Ground, MD 21005-5001
Same as item 8
12. DISTRIBUTION/AVAILABILITY STATEMENT
Distribution Statement A. Approved for public release; distribution is unlimited.
13. SUPPLEMENTARY NOTES
Defense Technical Information Center (DTIC), AD No.:
14. ABSTRACT
This document establishes specific design safety criteria for Active Hazard Mitigation Device (AHMD) intended for use
with munition systems for the purpose of reducing the severity of response from such systems when subjected to
Insensitive Munitions (IM) thermal threat environments.
15. SUBJECT TERMS
Active Hazard Mitigation Device
insensitive munitions
fast cook-off
slow cook-off
19a. NAME OF RESPONSIBLE PERSON
18. NUMBER
16. SECURITY CLASSIFICATION OF:
17. LIMITATION OF
OF
ABSTRACT
a. REPORT
B. ABSTRACT
C. THIS PAGE
PAGES
19b. TELEPHONE NUMBER (include area code)
Unclassified
Unclassified
Unclassified
14
SAR
Standard Form 298 (Rev. 8-98)
Prescribed by ANSI Std. Z39-18
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business