Joint Ordnance Test Procedure (JOTP)-050
Safety Design Requirements for Active Hazard Mitigation Device (AHMD) Employed to Address Fast
and Slow Cook-off Thermal Threats
DOCUMENT
TITLE AND SUBTITLE:
COMPLETION DATE:
Joint Ordnance Test Procedure (JOTP)-050
18 December 2014
Safety Design Requirements for Active Hazard Mitigation Device (AHMD)
Employed to Address Fast and Slow Cook-off Thermal Threats
PREPARING ACTIVITY:
SPONSORING ACTIVITY:
DOD Fuze Engineering Standardization Working Group
Range Infrastructure Division (CSTE-TM)
U.S. Army Armament Research, Development, and
US Army Test and Evaluation Command
2202 Aberdeen Boulevard
Engineering Center
Aberdeen Proving Ground, MD 21005-5001
ATTN: RDAR-EIZ / Building 6
Picatinny Arsenal, NJ 07806-5000
DISTRIBUTION STATEMENT:
Distribution Statement A. Approved for public release; distribution is unlimited.
ABSTRACT:
This document establishes specific design safety criteria for Active Hazard Mitigation Device (AHMD)
intended for use with munition systems for the purpose of reducing the severity of response from such
systems when subjected to Insensitive Munitions (IM) thermal threat environments.
COORDINATION DRAFT REVIEWED BY:
This document was coordinated with the following Standardization Offices: AR, AS, EA, MC, MI, MR,
OS, TE, AF-2, AF-70, and AF-99. In addition, the document was also coordinated with the Joint Weapon
Safety Working Group and select Subject Matter Experts (SMEs).
ASSIST COORDINATION DATE: 16 August 2014
IMPLEMENTATION PLAN:
1. This document was generated due to the unique functionality requirements of Active Hazard
Mitigation Device employed to mitigate IM thermal threats .
2. This document has been developed by the DOD Fuze Engineering Standardization Working Group
(FESWG) for use by the Service Safety Review Authorities to assess AHMD for an acceptable level of
safety for service use.
3. In all cases, the Service Safety Review Authorities will review the AHMD design and any applicable
safety and risk analyses for compliance with this document.
APPROVING AUTHORITY:
Director, Land Warfare & Munitions
Office of the Under Secretary of Defense for
Acquisition, Technology and Logistics
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business