MIL-STD-167-1A
1. SCOPE
1.1 Scope. This standard specifies procedures and establishes requirements for environmental and internally excited vibration testing of Naval shipboard equipment installed on ships with conventionally shafted propulsion (see 6.1.e and 6.1.f).
1.2 Applicability. The test methods specified herein are applicable to shipboard equipment subjected to mechanical vibrations from the environment and from internal excitation caused by unbalanced rotating components of Naval shipboard equipment. For those mechanical vibrations associated with reciprocating machinery and lateral and longitudinal vibrations of propulsion system and shafting, see MIL-STD-167-2.
1.3 Classification. The following types of vibration are covered in this standard: Type I - Environmental vibration
Type II - Internally excited vibration
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this standard. This section does not include documents cited in other sections of this standard or recommended for additional information or as examples. While every effort has been made to ensure the completeness of this list, document users are cautioned that they must meet all specified requirements of documents cited in sections 3, 4, or 5 of this standard, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract.
DEPARTMENT OF DEFENSE SPECIFICATIONS
MIL-M-17191 - Mounts, Resilient: Portsmouth Bonded Spool Type
MIL-M-17508 - Mounts, Resilient: Types 6E100, 6E150, 7E450, 6E900, 6E2000,
5E3500, 6E100BB, 6E150BB, 7E450BB, and 6E900BB
MIL-M-19379 - Mounts, Resilient, Mare Island Types 11M15, 11M25, and 10M50
MIL-M-19863 - Mount, Resilient: Type 5B5, 000H MIL-M-21649 - Mount, Resilient, Type 5M10, 000-H
MIL-M-24476 - Mounts, Resilient: Pipe Support, Types 7M50, 6M150, 6M450, 6M900, and 5M3500
(Copies of these documents are available online at https://assist.daps.dla.mil/quicksearch/ or https://assist.daps.dla.mil or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)
2.3 Order of precedence. In the event of a conflict between the text of this document and the references cited herein, the text of this document takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained.
3. DEFINITIONS
3.1 Acceptance authority. As used in this standard, the term "acceptance authority" means the government activity (or its designated representative) having approval authority to determine vendor compliance with the requirements of this standard.
1
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business